GE FANUC PLC

GE FANUC EMERSON IC695CPE310 RX3i CPE310 Controller- IC695CPE310  has a 1.1 GHz Atom processor and 10 MB of memory. Its embedded Ethernet interface accommodates two connections rated for 10Mb/sec and 100Mb/sec.- The module supports up to 512 program blocks, each of which can be as large as 128 KB. IC695CPE310 comprehends the Modbus RTU Slave, SNP, and Serial I/O protocols, while using the SNP protocol to communicate with human-machine interface (HMI) devices.

• Processing Speed:     1.1 GHz
• CPU Memory:             10 Mbytes
• Floating Point:              Yes
• Power Requirements:      3.3 VDC, 5 VDC or 24 VDC
• Serial Protocols:             Modbus RTU Slave, SNP Slave,                                         Serial I/O

GE FANUC Emerson IC695ACC400 CPU ENERGY PACK MODULE- The IC695ACC400 CPU energy pack is to maintain the power in the compatible CPU long enough for the CPU to write all of the contents of its user memory to the flash memory or the non-volatile storage memory to avoid data loss in the case of a power failure.- This CPU energy pack meets the EU RoHS Directive 2011/65/EU standards.- The IC695ACC400 CPU energy pack gets its energy by charging up with power that is provided by the RX3i PLC’s 24 Volts DC rail through the same IC695CBL001 cable that connects the energy pack to the CPU- CPU ENERGY PACK MODULE- INTENDED FOR USE WITH RX3I CPE305 OR CPE310 CONTROLLER CPU

The ge fanuc ic697bem713G module is a bus transmitter module which is used to enable connectivity with expansion racks. The ic697bem713 is compatible with the ic697 plcs. The high performance parallel programming function is an important feature. Additionally, this btm is easy to configure and does not require the use of dip switches.

• 500 kbytes/sec effective data rate
• 20-30 second time to store 16 kbyte program
• current requied 1. 4 amps
• with a 50 foot max cable length
• supports up to seven expansion racks
• bus transmitter module (btm), series 90-70

Buy New or Surplus FANUC IC200PWR102 ( POWER SUPPLY MODULE, 120/240 VAC INPUT, 27 VA INPUT POWER, 5 VDC MAX OUTPUT, EXPANDED 3.3

• Delivery Time: 2-3 WORKING DAYS

Buy New or Surplus FANUC IC200ALG264 ( INPUT MODULE, VERSAMAX, ANALOG, 15 POINT, 15 BIT, CURRENT, 0-20 MA / 4-20 MA ) parts. 

GE FANUC IC697CPM790-GD Series 90-70 Programmable Logic Controller (PLC) CPU, This CPU is specifically designed for use in Emergency Shut-Down (ESD), fire and gas, and other critical applications. This CPU has a built-in memory of 1 MB battery backed memory and supports up Triple Modular Redundancy.

• CENTRAL PROCESSING UNIT
• 64MHZ
• 32-BIT FLOATING
• 1MBYTE MEMORY
• SERIES 90-70

IC697BEM731 is a Bus Controller Module (BCM) manufactured by GE Fanuc for the 90-70 Series. IC697BEM731 is designed specifically for the Genius I/O handheld monitor IC660/IC661. The IC697BEM731 module is available as a single channel controller; thus it only occupies a single handheld monitor (IC66*) PLC slot.

• THIRTY DROPS PER SECOND
• I/O DIAGNOSTICS
• OPERATION AUGMENTED BY IC697
• PLC ALARM PROCESSOR FUNCTION
• BUS CONTROLLER
• GENIUS I/O
• SERIES 90-70

Buy New or User Surplus GE FANUC part number IC200CPU001-FJ
IC200CPU001
PLC CPU
VERSAMAX
34 K USER CONFIGURABLE USER MEMORY
1.80 MSEC/K BOOLEAN
ONE RS232 AND ONE RS485 SERIAL PORT

• Delivery Time: 2, 4, DAY

GE FANUC IC697PWR711M POWER SUPPLY MODULE Series 90-70, This power supply is used can be used to power One (1) or Two (2) racks. It may be configured for 120VAC / 240VAC input dictated by the jumper setting. It has +5VDC and +/-12VDC outputs with load capacity of 100 Watts, maximum.

• POWER SUPPLY MODULE
• 110/220 VAC OR 115 VDC
• 50/60 HZ
• 5 VDC OR +/-12 VDC OUTPUT
• 1.6/3.5/21 AMPS OUTPUT
• 100 WATTS MAXIMUM

GE FANUC IC697CMM742-LL Series 90-70 Ethernet Interface Card, The IC697CMM742 module is equipped with three network ports that establish connection between the IC697 PLC and Ethernet LAN. The Ethernet interface module’s network port is standard and designed with 15 pins that offer a choice of 10Base5, 10Base2, 10BaseT, 10BaseF, or 10Broad36 medium with a user-supplied 802.3-compatible transceiver.

• ETHERNET INTERFACE
• SERIES 90-70
• 10BASET AND 10BASE2 NETWORK PORTS
• STANDARD 15-PIN AUI NETWORK PORT
• PRE-LOADED FIRMWARE
• PROVIDES DATA EXCHANGE USING CONGIFURATION-BASED AND LOGIV-BASED ETHERNET GLOBAL DATA

Reza Automation - Offering Panel GE Fanuc IC698PSD300C Pacsystems Rx7i Power Supply, 24 Digits, 24 V DC at Rs 35000/piece in Bhavnagar, Gujarat.